Ball Valves


TU 3763-013-49652808-2007

Ball valve is designed as check or control device to be installed on pipelines with flow media temperature not exceeding +120°C.

Composition of produced fluids: technical water, oil with СО2 and H2S up to 6 %; natural gas containing liquid hydrocarbons, ethyleneglycol, methanol (СН3ОН), turbine oils, water and mechanical particles.

Resistance to the impact of the well media — K1, K2 in accordance with GOST 13846-89.

Operational temperature limits +40°C —60°C. Climatic category of the wellhead equipment — UHL(HL1) in accordance with the national standard GOST 15150-69.

Product specification level UTT-1(PSL-1) in accordance with the national standard GOST R 51365-99.

There are 2 types of the ball valves:

  • „T”-KSh (KShm) — full bore;
  • „T”-KShd — ball valves with built-in the gate chokes (quick-change or permanent, single or multi) for step control of the flow.

Ball valves are not intended for slide control of the flow.

Technical Characteristics

Nominal size DN, mm In accordance with GOST 28338-89*
Nominal pressure PN, Мpа (kg/sm2) In accordance with GOST 13846-89
Leak tightness of the gate A, in accordance with GOST R 54808-2011
Connection sizes:
- Flanges
- box endings
In accordance with GOST 28919-91 or RD 26-16-40-89
NKT thread in accordance with GOST 633-80
Diameters of chokes in the gate, * mm
- removable T-KSHd
- built- in Т-КSHd1
- built- in Т- КSHd 2

2, 3, 4, 5, 6, 7, 8, 10, 12
3, 4, 5, 6, 7, 8, 10, 12
3, 4, 5, 6, 8, 10, 12, 18
Length **, mm T-KSH:
T-KSHd (Т- KSHd1)
Т- KSHd2
110 (DN=40 mm, PN=21 МPа)
170 (DN=40 mm, PN=21 МPа)
110 (DN=40 mm, PN=21 МPа)
78 (DN=40 mm, PN=21 МPа)
Weight **, kg, no more T-KSH
T-KSHd (Т- KSHd1)
Т- KSHd2
9,5 (DN=40 mm, PN=21 МPа)
13,2 (DN=40 mm, PN=21 МPа)
10 (DN=40 mm, PN=21 МPа)
6,5 (DN=40 mm, PN=21 МPа)

Ball Valves

Back to catalog