LLC «Oil and Gas Equipment Plant «Technovek»
427430, Россия, Удмуртия, г. Воткинск, 6 км Камской железной дороги,
площадка «Сива» (а/я 125)
phone/fax: (34145) 6-03-00
email: info@technovek.ru

Disk Gate Valve

TU 3741-001-49652808-2000

 Disk Gate Valve  

Disk gate valves are designed to stop the flow in pipelines with different pressure and nominal bores. Flow media — water, technical oil, oil emulsion. Total service life is not less than 15 years. Time to failure is not less than 600 cycles. Total average life until the first full repair is not less than 5 years. Opening or closing operation is performed by the handle stop-to-stop position (90°).

Climatic category of the wellhead equipment — UHL(HL1) in accordance with the national standard GOST 15150-69.

Operational temperature limits +40°C −60°C. Flow media temperature is not exceeding +120°C.

Direction of the flow — any.

Typical sizes of the disk gate valve flanges are in accordance with GOST 12815.

Construction Length of the Disk Gate Valves

Operational pressure, Pn, kg/sm2 Nominal bore, mm
50 80 100 150
PN 16 180 210 230 280
PN 25 216 283 305 403
PN 40 216 283 305 403
PN 63 267 318 356 444
PN 160 292 356 432 559
PN 160 300 390 450 559
PN 250 350 470 550 750

 Disk Gate Valve

Construction Length of the Disk Gate Valve Flanges PN 16

Dn, mm D,mm D1, mm D2, mm h,mm b,mm n,mm d,mm
50 160 125 102 3 14 4 18
80 195 160 133 3 17 4 18
100 215 180 158 3 17 8 18
150 280 240 212 3 21 8 22

Construction Length of the Disk Gate Valve Flanges PN 25 и PN 40

Dn, mm D,mm D1, mm D2, mm h,mm b,mm n,mm d,mm
50 160 125 87 4 17 4 18
80 195 160 120 4 19 8 18
100 230 190 149 4 21 8 22
150 300 250 203 4 27 8 26

Construction Length of the Disk Gate Valve Flanges PN 63

Dn, mm D,mm D1, mm D2, mm D4, mm h,mm b,mm n,mm d,mm b2,mm h2,mm r,mm
50 160 125 87 85 4 17 4 18 12 8 4
80 195 160 120 115 4 19 8 18 12 8 4
100 230 190 149 145 4 21 8 22 12 8 4
150 300 250 203 205 4 27 8 26 14 10 4.2

Construction Length of the Disk Gate Valve Flanges PN 160

Dn, mm D,mm D1, mm D2, mm D4, mm h,mm b,mm n,mm d,mm b2,mm h2,mm r,mm
50 195 145 115 95 3 27 4 26 12 8 4
80 230 180 150 130 3 33 8 26 12 8 4
100 265 210 175 145 3 37 8 30 12 8 4
150 350 290 203 205 3 47 12 33 14 10 4.2

Construction Length of the Disk Gate Valve Flanges PN 250

Dn, mm D,mm D1, mm D4, mm b,mm n,mm d,mm b2,mm h2,mm r,mm
50 195 160 90 40 8 22 12 8 0.8
80 242 168 123.8 46 8 25 12 8 0.8
100 292 235 149.2 53 8 32 12 8 0.8