Injection Wellhead Equipment

TU 3665-009-49652808-2004

It is intended for wellhead sealing and controlling of its operational mode.

It is equipped with safe, easy-to-use and highly proof disk gate valves ZD-type.

To perform step control of the flow (for ANK1Sh) it is equipped with disk choke gate valves ZDSh. It takes 3-5 min. to change chokes in the disk choke gate valve ZDSh by one operator with the disk gate in the closed position without pressure release.

Alloys and materials used guarantee high resistance to wear and corrosion.

Can be transformed to the injection type ANK.

Climatic category of the wellhead equipment — UHL(HL1) in accordance with the national standard GOST 15150-69.

Temperature ranges +40°C −60°C.

Technical Characteristics
Operational Pressure Pn, MPa (psi)		14(2000), 21(3000), 35(5000)
Nominal Bore Dn, mm.	Master valve	65, 80, 100
	Side Outlets	50, 65, 80, 100
	Side Outlets of the Tubing Head	50, 65
Connection Thread	To tubing*	NKT73, NKT89, NKT102, NKT114 GOST 633-80
	To casing of M2,M3 type*	NKT73,NKT89,NKT102,NKT114 GOST 633-80
Exposure to production fluid		K1, K2 GOST 13846-89
Flowing fluid temperature, °C		Not to exceed 120

*Depending on the Customer’s order X-mas tree can be made with different type of thread.